GE PTD7000 Owner's Manual page 21

Troubleshooting tips ...
Problem
Excessive smoking
during clean cycle
Excessive smoking
during broiling
Oven door will not open
after a clean cycle
Oven not clean after a
clean cycle
"F— and a number or
letter" are displayed on
LCD screen
LCD is not functioning
properly
Power outage, clock
resets
"Burning" or "oily" odor
emitting from the vent
Strong odor
Fan noise
My oven door glass
appears to be "tinted" or
have a "rainbow" color.
Is this defective?
Sometimes the oven
takes longer to preheat
to the same temperature
Oven will not work
remotely
49-2000375 Rev. 2
Possible Cause
Excessive soil or grease.
Food too close to burner element.
Oven too hot.
Oven controls improperly set.
Oven was heavily soiled.
You have a function error code.
A fuse in your home may be blown or the circuit
breaker tripped.
Oven controls improperly set.
Power outage or surge
This is normal in a new oven and will disappear in
time.
An odor from the insulation around the inside of
the oven is normal for the first few times the oven
is used.
A cooling fan may automatically turn on.
barrier to reflect the heat back into the oven to
prevent heat loss and keep the outer door cool
while baking.
Cookware or food in oven
Router issues, no wireless signal, etc.
Oven is not connected.
What To Do
Press Cancel on the pad to the right of the screen
to stop the cycle. Open the windows to rid the room
of smoke. Wait until the door unlocks. Wipe up the
excess soil and reset the clean cycle.
Allow the oven to cool below locking temperature.
See the Cleaning the Oven section.
Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
Press Dismiss
cool for one hour. Put the oven back into operation.
error code repeats, call for service.
Replace the fuse or reset the circuit breaker.
See the Cooking Modes or Settings section to
ensure proper use. Ensure unit is updated to the
most recent software update.
this does not correct the issue, cycle power at the
circuit breaker and ensure unit is updated to the
most recent software update.
Cycle power at the circuit breaker and ensure unit is
persists, call service to assess the issue.
reset it by pressing Cancel, setting the clock and
resetting any cooking function.
To speed the process, set a self-clean cycle for a
minimum of 3 hours. See the Cleaning the Oven
section.
This is temporary and will go away after several
uses or a self-clean cycle.
This is normal. The cooling fan will turn on to cool
the oven is turned off.
may see this tint or rainbow color.
The cookware or food in the oven will cause the
oven to take longer to preheat. Remove items to
reduce preheat time.
Adding more racks to the oven will cause the oven
to take longer to preheat. Remove some racks.
The different cooking modes use different preheat
methods to heat the oven for the specific cooking
mode. Some modes will take longer than others (i.e.
convection bake multi).
For assistance with oven wireless network
connectivity, please call 1-800-220-6899.
Unlock
21