Page 1
HG 16-500 HG 20-600 HGE 23-650 LCD HGS 22-630 de Originalbetriebsanleitung 3 Alkuperäiset ohjeet 41 en Original instructions 8 no Original bruksanvisning 45 Notice originale 12 da Original brugsanvisning 49 Oorspronkelijke gebruiksaanwijzing 17 Instrukcja oryginalna 53 Istruzioni originali 22 Πρωτότυπο οδηγιώνχρήσης 58 es Manual original 27 hu Eredeti használati utasítás 63...
Page 3
The device must not be used if Only HG 16-500: Not intended for industrial or explosive gases are present. commercial use. The user bears sole responsibility for any damage This device can be used by caused by inappropriate use.
Page 4
Take care when changing hot nozzles! Danger of burns. Always take care where there are HG 16-500 toxic gases and a risk of explosion. The sliding switch (4) can be used to switch the tool on and off for selecting between 2 stages (for air Toxic can be created when volume and temperature).
To do this, first press the "P” program button until the program to be changed is displayed. Use only genuine Metabo accessories. Set the desired air volume and temperature. Press If you need any accessories, check with your the “P“...
Stage 2: ... 150-500 l/min A defective mains cable must be replaced only with Programs: 1=250°C / approx.350 l/ a special, original mains cable from Metabo available from the Metabo service. Contact your local Metabo representative if you 2=350°C / approx.400 l/ have Metabo power tools requiring repairs.
Need help?
Do you have a question about the HG 16-500 and is the answer not in the manual?
Questions and answers