Attaching And Removing The Casters; Block Diagram - Roland KC-1000 Owner's Manual

Attaching and Removing the Casters

The casters can be attached and removed as shown in the following diagram.
Be sure to remove all casters when accidental movement may be dangerous such as
when setting up the KC-1000 on stage or when transporting it in a vehicle.
If you use the KC-1000 with the casters connected, be sure to place it on a stable and
level surface.
Removal of the casters must be performed by two or more people.
fig.07

Block Diagram

ORGAN
SOUND TYPE
Input
STANDARD
VINTAGE CUSTOM
CABINET
MODELING
DSP
12
SYNTH/AUX
Input
ORCHESTRAL MIC
AMBIENCE
Input Input
MIN MAX
AMBIENCE
Line Out
TONE CONTROL
Headphones
LOW MIDDLE HIGH
0 0 0
40 W x 2
AMP
40 W x 2
EQ
AMP
150 W x 1
AMP
Front
Side
Woofer