Attaching And Removing The Casters - Roland VGA-7 Owner's Manual

V-guitar amplifier
Hide thumbs Also See for VGA-7:
Table of Contents

Advertisement

553
• Use a reasonable amount of care when using the unit's
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
554
• Never strike or apply strong pressure to the display.
556
• When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable's
internal elements.
557
• A small amount of heat will radiate from the unit during
normal operation.
558a
• To avoid disturbing your neighbors, try to keep the unit's
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
those around you (especially when it is late at night).
559a
• When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
• This is a heavy device. To prevent injury caused by the
unit overturning or being dropped, use two or more
people to carry the unit whenever possible.
561
• Use only the specified expression pedal (EV-5, FV-300L;
sold separately). By connecting any other expression
pedals, you risk causing malfunction and/or damage to
the unit.
562
• Use a cable from Roland to make the connection. If using
some other make of connection cable, please note the
following precautions.
• Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this
unit. The use of such cables can cause the sound level
to be extremely low, or impossible to hear. For infor-
mation on cable specifications, contact the manufac-
turer of the cable.
• To avoid injury, avoid placing hands at points indicated
by the arrows in the following figure.
• When this device is in operation, the cooling fins located
on the rear panel will become hot. Take care not to touch
them with your hands.
Attaching and Removing the
Casters
Attaching all of the casters can make it easier to move the
amplifier.
fig.casters
When using casters, take care not to allow fingers or other
parts of the hand or body to get pinched or injured.
Be sure to remove all casters when accidental movement may
be dangerous such as when setting up the VGA-7 on stage or
when transporting it in a vehicle.
If casters have been attached to the amp, make sure it is used
only on a stable, level surface.
IMPORTANT NOTES
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents