Table of Contents
Advertisement
Operating the product
5.17.2 Switching the machine to pause mode:
60
o
C
PAUSE
1200
88:88
Press the Start / Pause button to switch the machine to pause mode. The frame around the Start /
Pause button starts flashing. "Pause" appears on the display.
5.17.3 Changing the Programme selection after Programme has started:
The Programme change is not allowed when the current Programme is running.
If you turn the Programme Selection knob while the Programme is running, "Pause to make changes"
appears on the display.
You can select the new Programme after switching the current Programme to pause.
C
NOTE
¾ The selected Programme starts anew.
5.17.4 Changing the auxiliary function, speed and temperature settings
Depending on the step the Programme has reached, you can cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You can also change the speed, temperature and drying settings; see, "Spin speed selection" and
"Temperature selection".
NOTE
C
¾ The loading door will not open if the water temperature in the machine is high or the
water level is above the door opening.
5.18 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any
changes in a running Programme.
NOTE
¾ You can switch on and off the machine with On / Off button when the Child Lock is
C
active. When you switch on the machine again, Programme will resume from where it
has stopped.
¾ If you press any button when the Child Lock is activated, the machine will give an audible
warning. Audible warning will be cancelled when the buttons are pressed 5 times in a
row. The warning phrase on the screen goes on to be displayed.
5.18.1 To activate the Child Lock:
60
o
C
CHILD LOCK ENABLED
1200
88:88
Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. After the countdown as "Child
Lock 3-2-1" on the display is over, "Child Lock Enabled" appears on the display. You can release 2
User's Manual
and
nd
49 / EN
Advertisement
Table of Contents
