Cleaning The Air Suction Filter; Cleaning The Body And Control Panel - Beko WDA 8514 AT User Manual

Maintenance and cleaning

6.3 Cleaning the air suction filter

To clean the air suction filter:
Unplug the machine.
1
4
1 Attach the rear of the tool supplied in the Operation Manual bag to the place on the filter cap illustrated
in Fig. 1.
2 Pull the filter cap towards yourself with the help of a finger after pulling the latch leftwise with the back
side of the appartus as illustrated in Fig. 2.
3 Filter cap will come out easily.
4 Wash the filter cap.
5 Replace the filter cap and make sure that it seats well. If not seated twist the latch to the right with the
help of the apparatus.
CAUTION
¾ Never use sponge or scrub materials. These will damage the painted and
A
plastic surfaces.
¾ After every 50 washing and drying operation (approx. 3 months), clean the
air suction filter of the machine.
¾ If the machine is operated only for drying for 10 times in a row, always
perform an empty washing afterwards by using 1 short programme.

6.4 Cleaning the body and control panel

Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary, and
dry with a soft cloth.
Use only a soft and damp cloth to clean the control panel.
User's Manual
2
5
3
55 / EN