Beko WDA 8514 AT User Manual page 59

Troubleshooting
Washing takes longer than the specified in the manual.(*)
• Water pressure is low. >>>
quality due to the decreased amount of water. Therefore, the washing time extends.
• Voltage might be low. >>>
is low.
• Input temperature of water might be low. >>>
Also, washing time can be lengthened to avoid poor washing results.
• Number of rinses and/or amount of rinse water might have increased. >>>
amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary.
• Excessive foam might have occurred and automatic foam absorption system might have been
activated due to too much detergent usage. >>>
Programme time does not countdown. (On models with display) (*)
• Timer may stop during water intake. >>>
adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing
results due to lack of water. Timer indicator will resume countdown after this.
• Timer may stop during heating step. >>>
selected temperature.
• Timer may stop during spinning step. >>>
due to the unbalanced distribution of the laundry in the drum.
Programme time does not countdown. (*)
• There might be an imbalance of laundry in the machine. >>>
might be activated due to the unbalanced distribution of the laundry in the drum.
Machine does not switch to spinning step. (*)
• There might be an imbalance of laundry in the machine. >>>
might be activated due to the unbalanced distribution of the laundry in the drum.
• The machine will not spin if water is not drained completely. >>>
• Excessive foam might have occurred and automatic foam absorption system might have been
activated due to too much detergent usage. >>>
Washing performance is poor: Laundry turns gray. (**)
• Insufficient amount of detergent was used over a long period of time. >>>
amount of detergent appropriate for water hardness and the laundry.
• Washing was made at low temperatures for a long time over a long period of time. >>>
proper temperature for the laundry to be washed.
• Insufficient amount of detergent is used with hard waters. >>>
hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate
graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the
laundry.
• Too much detergent is used. >>>
and the laundry.
User's Manual
Machine waits until taking in adequate amount of water to prevent poor washing
Washing time is prolonged to avoid poor washing results when the supply voltage
Required time to heat up the water extends in cold seasons.
Use recommended amount of detergent.
Timer indicator will not countdown until the machine takes in
Timer indicator will not countdown until the machine reaches the
Automatic unbalanced load detection system might be activated
Use recommended amount of detergent.
Use the recommended amount of detergent appropriate for water hardness
Machine increases the
Automatic unbalanced load detection system
Automatic unbalanced load detection system
Check the filter and the draining hose.
Use the recommended
Using insufficient amount of detergent with
Select the
59 / EN