Switching The Machine To Pause Mode - Beko WDTE9746X User Manual

• Turn off and unplug the appliance.
• Open the pump filter cover.
• Remove the loading door emergency
handle behind the filter cover with a tool.
• Open the loading door by pulling the loading
door emergency handle downwards.
• Try to pull the handle downwards again
if the loading door is not opened.
• Bring the loading door emergency handle to its
original position after opening the loading door.
5.17 Changing the selections
after programme has started
5.17.1 Adding laundry after the
programme has started
When you press the Start/Pause button, the
"Loading door locked" light on the panel will go
off if the water level in the machine is suitable.
31 / EN
If the water level in the machine is not suitable
when you press the Start/Pause button, the
panel will warn you that the door is closed.
5.17.2 Switching the
machine to pause mode
Press the Start/Pause button to
switch the machine to pause mode.
5.17.3 Changing the
programme selection after
the programme has started:
If Child Lock is not enabled, you can change
programme while the current one is running.
This will cancel the current programme.
C
• The newly selected programme
will start anew.
5.17.4 Changing the auxiliary
function, spin speed and
temperature settings
Depending on the step the programme has
:
reached, you can cancel or select auxiliary
functions. See "Auxiliary function selection".
Also, you can change the spin speed,
temperature and drying settings. See "Spin
speed selection" and "Temperature selection".
C
• If the temperature of the water inside the
machine is high or if the water level is above
the door line, the loading door will not open.
INFORMATION
INFORMATION
Washer-Dryer / User's Manual