Advertisement
Quick Links
Advertisement
Related Manuals for Flow Controller Systems FCS KA6/12
Summary of Contents for Flow Controller Systems FCS KA6/12
- Page 1 FCS KA6/12 Basic Peristaltic Pump Operation Manual...
- Page 2 KA6/12 Note: Ø Please read the manual carefully before operating the product. Warning: Ø Tubing may have crack due to wear. It results in the overflow of fluid from tubing. In that time human body and instruments may be harmed. Users must check frequently and change tubing in time. Ø...
- Page 3 KA6/12 Catalogue Product Instruction ....................................- 4 - Product Appearance ....................................- 4 - Product Keypad Instruction .................................. - 4 - External Control Interface Instruction ..............................- 5 - Technical Specifications ..................................- 7 - Main Functions and Features ................................- 8 - Dimension Drawing ....................................
- Page 4 KA6/12 Product Instruction M6 series pump speed range is 0.1-600 rpm, flow rate range is 0.211~12000 ml/min. Adjust speed manually or automatically through external control interface. Power-down memory function, when re-power on, the pump will work with previous status. Timing test function, timing range: 0.5~999s, it is convenient for calibration and test. It can support 7 different external control modes, make more convenient.
- Page 5 KA6/12 In internal control mode, keep pressing this knob, the pump runs with full speed, LED display “FULL”. Release the knob, it displays the pump return to normal speed. External control button The external control mode button is enabled only when the pump stops working. It used for changing between different external control modes that is 7 different modes in total.
- Page 6 KA6/12 Pin 1, 0-5V: Connecting positive pole for the signal that controlling the motor speed, 0-5V connecting wiring port. Pin 2, WK-RUN/STOP: External control start/stop input port (Passive signal: Motor running in normal closed status, motor stop running in normal open status.) Pin 3, WK-DIRECT: External control motor running direction signal input port.
- Page 7 KA6/12 Isolated External Control Pin Definition Pin 12 Active WK-RUN/STOP: Isolated external control start/stop signal input port (Active signal: 5-24V). Pin 13, Active WK-DIRECT: Isolated external control direction signal input port (Active signal: 5-24V). Pin 14, Active-GND: Isolated external control signal input ground wire. Isolated External Control Wiring Diagram 12脚...
- Page 8 KA6/12 Main Functions and Features Ø Digital knob control speed manually or automatically through external control interface. Ø Timing test function, it is convenient to test the flow rate within specified time. Ø Full speed button with filling and emptying functions. Ø...
- Page 9 KA6/12 DZ25-6L Pump Head EasyPump Pump Head 7.2 Product Dimension M6-3L + EasyPump - 9 -...
-
Page 10: Maintenance
KA6/12 M6-3L + DZ25-3L M6-6L + DZ25-6L M6-12L + YZ35 Maintenance Ø When the pump does not work, please loose the cartridges of pressing the tubing for avoiding changing the shape of tubing because of longtime extrusion. Ø The surface of drive and pump head do not resist strong corrosive liquids, please pay attention to this when use the pump. Ø... - Page 11 Electrical surge as a cause of failure is excluded. Ø Chemical attack is excluded Ø Improper operation or man-made damage as a cause of failure is excluded. Flow Controller Systems 2950 Buskirk Ave Suite 300 Walnut Creek CA 94597 Tel: 925-516-4459 Website: flowcontrollersystems.com Email: justin@fcs-us.net...