Leuze electronic HFU 4520D Short Description page 15

Bluetooth
Bluetooth: ON
Search Device
Show local
Set Remote
Set Device
Set AccessKey
Set Securitystat
Reset BT
Date & Time
Display
Sound
Power
Version
Reset Device
Device Settings
* Note: The availability of the memory banks TID (serial number), EPC and User block depends on the used
transponder chip and may be not always available. The EPC bank is typically available with 8 – 12 characters
and 4-6 blocks at any chip type.
Short description HFU 4520D
Settings for bluetooth, MAC adresses, Access key,
and Bluetooth reset , Shows BT State, ON / OFF
Activates Search process for BT Base
Shows actual MAC address
Manual Set ting of MAC address
Manual Setting of Device Name
BT PIN: Factory 1234
Usage of BT PIN ON / OFF
Reset and start of Bluetooth connection
Set Device Date+time via Key board
Set contrast and orientation of display
Set Bieper volume, key click
shows supply Voltage, select auto power off time
shows Version of Hardware / Firmware of device
select sets device to factory defaults, for BT please use twice
select Region (UHF-Band), power level
Region EUROPE, USA,Korea, China; factory EUROPE
Gen2 Session:(filtering time of recognized tags)
(0- no filter, 1-5sec, 2-10sec, 3-15sec), factory 1
power: 10mW to 200mW(value 1000-2300), factory 2300
recommended min 1700 (with reset this point is first)
Leuze electronic Page 15