Related Manuals for Leuze electronic HFU 4520D
Summary of Contents for Leuze electronic HFU 4520D
- Page 1 HFU 4520D combined mobile RFID- and 1D / 2D Code- hand held reader with Bluetooth Short Description Version V 2.01...
-
Page 2: Table Of Contents
Note This document is just for information about how to use the mobile combi device HFU 4520D from Leuze electronic. All important details about the functionality and the handling were described further on. In addition the typical connections together with the modular connector units (MA) are in this manual, too. -
Page 3: Delivery Contents
RT I/O ..........................21 ONNECTION TO ROFINET TCP/IP ........................... 22 ONNECTION TO THERNET Delivery contents HFU 4520D 1. Mobile combi RFID + 1D/ 2D code-Hand held reader 2. pre mounted battery in handle 3. Bypack paper Short description HFU 4520D Leuze electronic Page... -
Page 4: Safety Notices
Attention! Access to or changes on the device, except where expressly described in this document, are not authorized. Qualified personnel Mounting, commissioning and maintenance of the device must only be carried out by qualified personnel. Electrical work must only be carried out by a certified electrician. Short description HFU 4520D Leuze electronic Page... -
Page 5: Installation
5. With the black marked keys the function is selected and with the yellow marked key activated. Settings for data output, code types etc. can be set in the ‚system‘ area (right yellow key). Short description HFU 4520D Leuze electronic... -
Page 6: How Is The Best Way To Scan Or Read
The read characteristics are printed on page 8 Test barcode The printed code is to test the functionality of the scanner, module(bar) width is 0.5 mm (20 mil) Code 39 Bar Code Sample Short description HFU 4520D Leuze electronic Page... -
Page 7: Technical Data
Valid Standards EN 301489-3 EN 302208-1 Protection class IP54 Temperature (operation) -20 to 50 °C (storage) -20 to 50° C * depends on used Transponder **depends on used optical 1D / 2D code type Short description HFU 4520D Leuze electronic Page... -
Page 8: Read Characteristics
Readable 2D-Codes: (Release per selecting, factory set all ) ECC200, PDF, QR, Maxicode, GS1-codabar Familiy Cell size: 0.21 to 0.9mm, Working area RFID Antenna TFU05 TFU10 450mm Readable Transponder-Types: EPC1Gen2 (NXP G2XM, GSXL, Alien Higgs3 Out of ISO18000-6C) Short description HFU 4520D Leuze electronic Page... -
Page 9: Using The Hfu 4520D
Using the HFU 4520D Keys for operation Function ON/OFF/ACK Switching Device On / Off, Acknowledge parameter settings <7> yellow pick / select pick / select menu /function < > black arrows Movement between Menu parts cancel Cancel / Back 0-9/ABC... - Page 10 (activate Messages) with “SFC0” when no function is selected, “SFC1” with selected function 1 (SCAN Barcode) etc. (see no 3.) Note: Please combine Commands and Data (characters or numbers) directly (without space between) into One single telegram, enclosed of the telegram prefix/suffix Short description HFU 4520D Leuze electronic Page...
-
Page 11: Device Reset / Factory Default
Note: All individual settings are lost then!!! Parameter Setting All parameters are available and can be set via key board in different sub menus within the system menu. No separate or special software tool is needed. Short description HFU 4520D Leuze electronic Page... -
Page 12: Telegram- / Command Structure
Telegram- / Command structure The factory presets are similar to the other available fix mounted RFID- devices from Leuze electronic. The Standard telegram structure is shown below, with 9600Bd, 8Databits , N,1 : Command CR LF ASCII-Character 0Dh 0Ah For this device you can change the telegram frame and the Baudrate. -
Page 13: Menu Structure
Type in Telegram-End character , factory 0D,0A Select ASCII / HEX, ab Werk ASCII Data format Select FULL (compl. Telegram (RFID!)), factory full Data send Data only OFF (no Data output via interface) Short description HFU 4520D Leuze electronic Page... - Page 14 ON/OFF for Send Messages via Interface, factory OFF NO Read ON/OFF for Send NORead Message, factory OFF USE Qty ON/OFF for Input line for type in Quantity, factory OFF Qty separator Select separator for amount in telegram, Short description HFU 4520D Leuze electronic Page...
- Page 15 * Note: The availability of the memory banks TID (serial number), EPC and User block depends on the used transponder chip and may be not always available. The EPC bank is typically available with 8 – 12 characters and 4-6 blocks at any chip type. Short description HFU 4520D Leuze electronic...
-
Page 16: Hfu 4520D At Serial Pc-Interface
HFU 4520D at serial PC-Interface With Power supply via separate power plug NT Hx5x0, Art-Nr. 50110676 necessary parts: 50114138 HFU 4520D, incl. battery 5011 0676 NT Hx5x0, Power supply (100-240VAC/6VDC) 50110672 Base Hx520, Bluetooth base 50110675 KB-RS232-Base Hx520, RS232 cable, 2m length... -
Page 17: Hfu 4520D With Ma 204I, Ma208I Or Ma248I
HFU 4520D with MA 204i, MA208i or MA248i RS 232 with 9600 Baud, 8 Data bits, 1 Stoppbit, No Parity, Postfixes CR/LF. Necessary parts: 50114138 HFU 4520D, incl. battery 50110672 Base Hx520, Bluetooth base 50110675 KB-RS232-Base Hx520, RS232 cable, 2m length... -
Page 18: Hfu 4520D With Usb (Com-Port-Emulation)
HFU 4520D with USB (COM-Port-Emulation) To use the HFU 45xxD with USB you use the standard RS232 cable and connect the USB Converter cable. The data is sent to the new COM-Port. The necessary driver is available on www.leuze.de. the interface is set to 9600,8,N,1.Separate power supply needed. -
Page 19: Diagnostics And Trouble Shooting
7. RFID: Please check the settings for RFID and check the transponder type with your supplier. If the settings are correct the transponder can be defect as well- try another one if possible. 8. Now you checked most possibilities. For further support please contact the Leuze Service. Short description HFU 4520D Leuze electronic... -
Page 20: Type Overview
Type overview HFU 45xx – Series Art-No. Description Interface Picture HFU 4520D, incl. battery 50114138 TTL RS232 Accessories Accessories for HFU 45xx Picture Art-No. Discription Base Hx520, Bluetooth base and charging 50110672 station for Hx520D, RS232 KB-RS232-Base Hx520, RS232-cable for... -
Page 21: Connection To Leuze Multinet Plus
Connection cable MA20x with 9pin Sub-D, 5VDC at PIN9, length 300mm • Art-No. 50113397 Base Hx520 Bluetooth Base • Art-No. 50110672 NT Hx5x0 Power supply, (100-240VAC/6 VDC) • Art-No. 50110676 KB-RS232-Base Hx520 RS232-cable for Base, 2m length • Short description HFU 4520D Leuze electronic Page... - Page 22 Art. No. 50110675 Leuze electronic GmbH+Co.KG Postbox 1111 In der Braike 1 D-73277 Owen / Teck Tel +49 (07021) 573-0 Fax +49 (07021) 573199 E-mail: info@leuze.de State 09 / 2012 http://www.leuze.de document TD_HFU4520D_en_50119344 Short description HFU 4520D Leuze electronic Page...