Maintenance - Toro Recyler 22038 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.
Maintenance Service
Interval
Each Use
5 Hours
25 Hours
50 Hours
75 Hours
100 Hours
Storage
Important Refer to your engine operator's manual for additional maintenance procedures.
If you leave the wire on the spark plug, someone could accidently start the engine and seriously
injure you or other bystanders.
Disconnect the wire from the spark plug before you do any maintenance. Set the wire aside so
that it does not accidently contact the spark plug.
All manuals and user guides at all-guides.com
Maintenance Procedure
Remove grass clippings and dirt from under the housing. Refer to Cleaning
under the Housing on page 15.
Clean the discharge tunnel and the discharge tunnel plug. Refer to Cleaning the
Discharge Tunnel and Plug on page 16.
Check the blade and the engine mounting fasteners. Tighten them if they are
loose.
Clean the air cleaner (Clean it more frequently in dusty or dirty conditions). Refer
to Servicing the Air Cleaner on page 16.
Inspect the spark plug and replace it if necessary. Refer to Servicing the Spark
Plug on page 16.
Lubricate the pivot arms. Refer to Lubricating the Pivot Arms on page 16.
Sharpen or replace the blade; maintain it more frequently if the edge dulls
quickly in rough or in sandy conditions. Refer to Maintaining the Blade on
page 17.
Check for leaks in the fuel system and/or a deteriorating fuel hose. Replace
parts if necessary.
Remove grass clippings and debris from under the belt cover. Refer to Cleaning
under the Belt Cover on page 18.
Clean the cooling system. Refer to Cleaning the Cooling System on page 18.
Adjust the throttle. Refer to Adjusting the Throttle on page 19.
Adjust the self-propel drive. Refer to Adjusting the Self-propel Drive System on
page 19.
Clean the muffler and the exhaust port. Refer to Cleaning the Muffler and
Exhaust Ports on page 20.
Lubricate the gear case. Refer to Lubricating the Gear Case on page 20.
Adjust the blade brake cable. Refer to Adjusting the Blade Brake Cable on
page 21.
Service the wheels. Refer to Servicing the Wheels on page 21.
Empty the fuel tank before repairs as directed or before storage. Refer to
Emptying the Fuel Tank on page 22.
Caution
14