Advertisement
GE H
EALTHCARE
D
5158821-100, R
IRECTION
20. Record the line length (appears in the top left of the screen). Make a note of this value in the
21. Repeat the above steps 9 to 20 for the D2 image, recording values in the Worksheet.
22. Access the Calculators tab in Calibration Tools and
23. Press the Update button. The system provides the
Page 190
3
EVISION
Worksheet.
Make note of its line length in the Worksheet.
enter the following in the Source-Detector Distance
Calculator:
width1:
enter line length of D1
width2:
enter line length of D2
mag. dist.: enter the distance the tool was moved back
(i.e. 100mm).
Source-Detector distance.
Make note of this value (should be approximately 250) in the Worksheet.
X
L
SP S
E
PLORE
OCUS
ERVICE
G
UIDE
Advertisement
