Advertisement
With the Westfalia gutter protection you can
forget all the trouble with leaves in your roof
gutters after you once installed it. Just flush
your gutters every few years and you are
done.
Stainless steel sheets and durable clips
ensure a long service life.
Make sure that the cover fits your rain gutter.
The cover is available in 10, 12.5, and 15 cm
wide.
Mounting clips are included with the
package. The clips are made of metal
and are 18 cm long.
1. Cut the covers down to the right length
with plate shears or a similar tool. Be
careful, the edges can be very sharp.
Always wear gloves during this work.
2. Clip the mounting clips into the holes in
the cover with the tongues in regular
intervals. The hook-shaped part of the
clips must reach over the cover edge.
3. Push the cover under your roofing and
clip it to the rolled edge of the gutter by
means of the clips. Water from the roof
must be able to drain into the gutter, but
leafs shall be kept out.
Always take precautions against falling
off the roof while involved in this work.
Operation
A
Attention! Make sure the
gutter cover is lying on the
rolled front edge (A) of the
gutter. On the opposite side
of the folded edge (B), the
gutter will just butt against
the edge.
Make sure the clips will hook
under the rear folded edge as
far as possible.
4
B
Advertisement
