Home >
Appendix
> How to Enter Text on Your Brother Machine
How to Enter Text on Your Brother Machine
>> HL-L3210CW/HL-L3230CDW
>> HL-L3270CDW
HL-L3210CW/HL-L3230CDW
When text is required, enter characters on the machine. The characters that are available may differ depending
on the operation you perform.
•
Hold down or repeatedly press a or b to select a character from this list:
0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ(space)!"#$%&'()*+,-./:;<=>?
@[\]^_'{|}~
•
Press OK when the character or symbol you want is displayed, and then enter the next character.
•
Press Back to delete characters entered incorrectly.
HL-L3270CDW
•
When you must enter text on your Brother machine, a keyboard appears on the LCD.
•
The characters that are available may differ depending on your country.
•
The keyboard layout may differ depending on the operation you perform.
•
Press
to cycle between letters, numbers and special characters.
•
Press
to cycle between lowercase and uppercase letters.
•
To move the cursor to the left or right, press d or c.
Inserting spaces
•
To enter a space, press [Space].
Making corrections
•
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character and press
•
To insert a character, press d or c to move the cursor to the correct place, and then enter the character.
•
Press
for each character you want to erase, or press and hold
Related Information
•
Appendix
Related Topics:
•
Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
. Enter the correct character.
to erase all the characters.
342