Brother HL-L3230CDW Online User's Manual page 332

Level 3 Level 4
WLAN TCP/IP
Setup Wizard
WLAN Assistant
WPS
WPS w/ PIN
Code
WLAN Status
MAC Address
Set to Default
WLAN Enable
Wi-Fi Push Button
Direct
PIN Code
Manual
Group Owner
Device
Information
Status
Information
I/F Enable
NFC -
Web Connect Proxy Settings
Settings
Level 5 Level 6
DNS Server Secondary Specify the secondary DNS server's IP
APIPA -
IPv6 -
- -
- -
- -
- -
Status -
Signal -
SSID -
Comm. Mode
-
- -
- -
- -
- -
- -
- -
- -
Device Name -
SSID -
IP Address -
Status -
Signal -
- -
- -
Proxy -
Connection
Address -
Port -
User Name -
Descriptions
address.
Allocate the IP address from the link-local
address range automatically
Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother support website at
support.brother.com.
Configure the wireless network settings
using the setup wizard.
Configure your wireless network settings
using the Brother installation disc.
Configure your wireless network settings
using the one-button push method.
Configure the wireless network settings
using WPS with a PIN code.
Display the wireless Ethernet link status.
Display the signal condition.
Display SSID.
Display the current Communication
mode.
Display the MAC address of the machine.
Restore wireless network settings of your
machine to the factory settings.
Turn the wireless interface on or off.
Configure your Wi-Fi Direct network
settings using the one-button push
method quickly.
Configure your Wi-Fi Direct network
settings using WPS with a PIN code
quickly.
Configure your Wi-Fi Direct network
settings manually.
Set your machine as the Group Owner.
View your machine's device name.
Display the Group Owner's SSID.
Display your machine's IP Address.
Display the Wi-Fi Direct network status.
Display the current Wi-Fi Direct network
signal strength.
Enable or disable the Wi-Fi Direct
connection.
Turn the NFC function on or off.
Change the web connection settings.
1
.
327