Husqvarna DE 110i H Operator's Manual page 13

2. Put the battery in the battery charger.
3. Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
4. When all LEDs on the battery come on, the battery is
fully charged.
A
5. To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6. Remove the battery from the battery charger.
Note:
Refer to the battery and battery charger
manuals for more information.
To lock and unlock the transport
wheels
For operation on a surface with a slope it is necessary to
lock the transport wheels.
WARNING:
must be clean and without dust for safe
operations. Refer to
on page 18 .
1618 - 006 - 01.06.2023
B C D
Wheels and bearings
Maintenance schedule
1. Hold the product in a stationary and safe position.
2. Push down the wheel brake on each side to lock the
wheels.
Note:
DE110i H has only 1 wheel brake.
3. Pull up the wheel brakes to unlock the wheels.
Functions of the control panel
The control panel controls and monitors important
functions and setups of the product. Refer to
on the control panel on page 23 to find solutions for the
warnings.
1
1. The prefilter is clogged. Refer to
particles from the prefilter during operation on page
16 .
Warnings
2
3
4
5
6
7
To remove dust
13