THERMOSTAHL EBS 24 User Manual

Wall mounted instantaneous combi boiler room sealed chamber

Advertisement

Quick Links

User Manual
for model
E BS 24
Wall mounted instantaneous combi boiler
room sealed chamber
CE
0694

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EBS 24 and is the answer not in the manual?

Questions and answers

Summary of Contents for THERMOSTAHL EBS 24

  • Page 1 User Manual for model E BS 24 Wall mounted instantaneous combi boiler room sealed chamber 0694...
  • Page 3 The installation, first start-up, regulation and maintenance operations must be carried out exclusively by qualified personnel (e.g. THERMOSTAHL authorised Service Centres). Incorrect installation can cause damage to property and injury to persons or animals, for which the manufacturer will not be held responsible.
  • Page 4 USER INSTRUCTIONS If you smell gas … DO NOT ACTIVATE ANY ELECTRIC SWITCHES, TELEPHONES OR ANY OTHER DEVICE THAT MAY GENERATE ELECTRICAL DISCHARGES OR SPARKS. OPEN DOORS AND WINDOWS IMMEDIATELY TO CREATE A CURRENT OF AIR THAT WILL RAPIDLY CLEAR THE ROOM. CLOSE ALL GAS TAPS AND VALVES.
  • Page 5 USER INSTRUCTIONS Starting - up the boiler Open the gas Isolation valve located under the boiler. • Press the button 6 ‘ ’ (fig. 1); The boiler will light automatically (with the WINTER mode selected and room thermostat connected). • Check that there are no flashing numbers on the display 1 (see error codes).
  • Page 6 USER INSTRUCTIONS ■ Topping-up the system with water The water pressure in the central heating circuit must be checked during the entire period of operation of the boiler. In this respect, the reading on the pressure gauge M (fig. 2), located on the lower part of the boiler, must not be less than 1 bar.
  • Page 7 USER INSTRUCTIONS E05_ Heating Sensor malfunction _E05 Code E05 lit continuously on the display. Call the Service Centre. E E E E 06 D.H.W sensor malfunction Code E06 lit continuously on the display. Call the Service Centre. E E E E 17 17 Modulator out of order Code E17 lit continuously on the display.
  • Page 8 THE TECHNICAL DATA AND MEASUREMENTS ARE PROVIDED FOR INFORMATION PURPOSES ONLY AND ARE NOT BINDING. THE COMPANY RESERVES THE RIGHT TO APPLY VARIATIONS WITHOUT PRIOR NOTIFICATION. NEITHER WILL THE COMPANY BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS HANDBOOK DERIVING FROM PRINTING OR TRANSLATION ERRORS. E+OEALL RIGHTS RESERVED.

Table of Contents