Table of Contents
Advertisement
Pausing the operation
Press the start/stop button: The oven is paused. Press
the start/stop button again; the operation continues.
Open the appliance door: The operation is interrupted.
After closing the door, press the start/stop button. The
operation continues.
If you have altered the basic setting, make sure
Note:
that the microwave does not resume operation without
food inside. ~ Page 16
:
Warning – Risk of burns!
The accessible parts become very hot when in
operation. Never touch hot parts. Keep children at a
safe distance.
Cancelling the operation
Press the On/Off button.
Drying function
After each microwave operation, use the drying function
. The cooking compartment is heated up and the
[
moisture in the cooking compartment evaporates.
The drying function takes 10 minutes and the duration
cannot be changed.
Open the Types of heating menu.
1.
Select the drying function.
2.
Press the Start/Stop button to start.
3.
The drying function starts and ends automatically
after 10 minutes.
Open the appliance door for a few minutes until the
cooking compartment is completely dry.
Caution!
Enamel damage: Do not start any operations when
there is water on the cooking compartment floor. Before
operation, wipe away the water from the cooking
compartment floor.
Drying the cooking compartment by hand
Allow the appliance to cool down.
1.
Remove any food remnants from the walls of the
2.
cooking compartment.
Dry the cooking compartment with a sponge.
3.
Leave the appliance door open for 1 hour so that the
4.
cooking compartment dries completely.
DCleaning agent
W ith good care and cleaning, your appliance will retain
C l e a n i n g a g e n t
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
Suitable cleaning agents
To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table. Depending on the appliance
model, not all of the areas listed may be on/in your
appliance.
Caution!
Risk of surface damage
Do not use:
Harsh or abrasive cleaning agents,
■
Cleaning agents with a high alcohol content,
■
Hard scouring pads or cleaning sponges,
■
High-pressure cleaners or steam cleaners,
■
Special cleaners for cleaning the appliance while it is
■
hot.
Wash new sponge cloths thoroughly before use.
Highly recommended cleaning and care products
Tip:
can be purchased through the after-sales service.
Observe the respective manufacturer's instructions.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Area
Cleaning
Appliance exterior
Stainless steel
Hot soapy water:
front
Clean with a dish cloth and then dry with a soft
cloth.
Remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately. Corrosion
can form under such flecks.
Special stainless steel cleaning products suitable
for hot surfaces are available from our after-sales
service or from specialist retailers. Apply a very
thin layer of the cleaning product with a soft cloth.
Plastic
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Painted surfaces
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Control panel
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Cleaning agent
en
19
Advertisement
Table of Contents
