HP EliteDesk 800 G3 SFF Hardware Reference Manual page 44
Hide thumbs
Also See for EliteDesk 800 G3 SFF:
- Maintenance and service manual (165 pages) ,
- Disassembly instructions manual (11 pages) ,
- Quick start manual (2 pages)
Advertisement
9.
To remove an M.2 SSD card, remove the screw that secures the card (1), lift the end of the card up (2),
and then slide the card out of the system board connector (3).
10.
To install an M.2 SSD card, slide the pins on the card into the system board connector while holding the
card at approximately a 30° angle (1). Press the other end of the card down (2), and then secure the card
with the screw (3).
38
Chapter 2 Hardware upgrades
Advertisement
