D-Link DCS-2530L User Manual page 24

Section 3: Configuration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your new D-Link
Camera and connect the camera to the Internet. Click Next to continue.
Select how the camera will connect to the Internet.
If your camera is connected to a router, or you are unsure how your camera will connect to
the Internet, select DHCP.
Select Static IP Client if your Internet Service Provider has provided you with connection
settings, or if you wish to set a static address within your home network. Enter the correct
configuration information and click Next to continue.
If you are using PPPoE, select Enable PPPoE and enter your user name and password.
Click Next to continue.
D-Link DCS-2530L User Manual 24