D-Link DCS-2530L User Manual page 11

Section 2: Installation
If you have a mydlink-enabled Wi-FI Router, you can take advantage of Zero Configuration Setup. Zero Configuration automatically configures
your camera's settings for you, and adds the camera to your mydlink account automatically. This type of setup allows you to set up your camera by
simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Wi-Fi router and Zero Configuration will automatically configure your DCS-2530L and
add the camera to your mydlink account. After the short time it takes to do this you can remotely access your camera from the website
(http://www.mydlink.com) or the mydlink app to manage and monitor your DCS-2530L.
Plug in the External Power Adapter
Connect the power adapter to the microUSB port on the back of the camera. Plug the power
adapter in to a wall outlet.
Press the WPS button on your camera
Press and hold the WPS button for three seconds. The blue WPS status LED will start blinking.
Press the WPS button on your Wi-Fi Router
Press the WPS button on your router within 60 seconds. The WPS button is usually on the
side or back of your Wi-Fi router. The DCS-2530L will automatically create a secure wireless
connection to your router and reboot. When it has successfully connected, the Power LED will
be lit green and the Direct LED will be turned off.
D-Link DCS-2530L User Manual
Zero Configuration Setup
11