GreenWorks GPW 2003 Owner's Manual page 13

ASSEMBLY
ASSEMBLING THE FRONT PANEL AND GUN HOLDER
See Figure 5.
• Line up the screw sleeves with the holes in the upper handle and push through.
• Insert the screw and turn clockwise with a phillips head screw driver (not included) until the
screw is tight.
ASSEMBLING THE HOSE HOOK
See Figure 5.
• Line up the hose hook upper end with the holes on the back of the front panel
• Insert the hose hook end into the hole and push through.
• Press the hose hook lower end into the clip on the back of the front panel.
upper end
hole
lower end
clip
Fig. 5
13