Advertisement
a
2 recirculation vents
(recirculation mode only)
b
2 protective shields
prevent scratches to the chimney
during installation.
c
1 protective shield
prevents scratches from the canopy
during installation.
d
1 diverter
(recirculation mode only)
e
1 flex hose for connecting the
diverter to the exhaust connection.
f
2 hose clips for securing the
ducting.
g
1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
h
1 non-return flap for vented air
extraction only.
i
Upper retaining plate B secures
the chimney extension.
j
Middle retaining plate C for
additional stability of the chimney.
k
Lower retaining plate A secures
the canopy and motor assembly.
Installation accessories
12 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy.
(S8 wall anchors included in the
packaging are not for use in USA /
CDN.)
2 M 6 locking nuts for securing the
motor assembly.
4 screws 3.9 x 7.5 mm for securing the
chimney and the chimney extension
CAUTION:
During the installation process
please be careful of sharp edges
that can cause harm.
25
Advertisement
