Advertisement
Storing the Housing
When the housing is going to be stored for a prolonged period it should
be soaked in a mild soap solution, rinsed, and dried thoroughly. Remove
the back and port from the housing. Remove the back and port o-rings,
lightly lubricate them and place them in a plastic ziploc bag. Place the
plastic bag inside the housing for storage. Operate the push buttons
.
periodically
Technical Support
Email: ikelite@ikelite.com
Phone 317.923.4523
Fax 317.924.7988
Limited Warranty
This Ikelite product is warranted against any manufacturing defects for a
period of one year from the original date of purchase. Defective products
should be returned prepaid to Ikelite. Ikelite will, at its discretion, repair
or replace such products, and will return to customer prepaid. All other
claims of any nature are not covered. Except as mentioned above, no
other warranty expressed or implied, applies to this Ikelite product.
27
Advertisement
