Axis Q1647 User Manual page 20

AXIS Q16 Network Camera Series
Setup
1. Set up the stream profile to include audio, see How to add audio to your recording on page 18.
Make sure the audio detection is set up:
2. Go to Settings > System > Detectors > Audio detection.
3. Adjust the alarm level according to your needs.
Create an action rule:
4. Go to Settings > System > Events and add an action rule.
5. Type a name for the action rule.
6. From the list of triggers, select Detectors and then select Audio Detection.
7. From the list of actions, select Record video.
8. Select the stream profile where audio has been turned on or create a new one.
9. Enable and set the pre-trigger time to 5 seconds.
10. Enable While the rule is active.
11. Enable and set the post-trigger time to 60 seconds.
12. Select SD card from the list of storage options.
13. Click OK.
How to record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to the environment or to an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera after hours and you would like to get a video clip of the event.
1. Go to Settings > System > Detectors.
2. Set shock detection to on, and set a value for the shock sensitivity.
Create an action rule:
3. Go to Settings > System > Events and add an action rule.
4. Type a name for the action rule.
5. From the list of triggers, select Detectors and then select Shock detection.
6. From the list of schedules, select After Hours.
7. From the list of actions, select Send Video Clip.
8. Select an existing stream profile or create a new one.
9. Enable and set the pre-trigger time to 5 seconds.
10. Enable While the rule is active.
11. Enable and set the post-trigger time to 60 seconds.
12. Select an existing recipient or create a new one.
13. Click OK.
20