Advertisement
1. License plate light bulb
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars and nuts.
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing an auxiliary light
bulb
1
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the headlight unit side
covers by removing the bolts on
each side.
1
1. Bolt
EAU58021
1
2
1. Bolt
2. Headlight unit side cover
1
2. Remove the auxiliary light bulb
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
7-38
socket (together with the bulb) by
turning it counterclockwise.
1
pulling it out.
1
2
7
Advertisement
