Advertisement
OPERATION AND IMPORTANT RIDING POINTS
Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
6
EAU15952
TIP
This model is equipped with:
a lean angle sensor to stop the en-
gine in case of a turnover. In this
EWA10272
case, the multi-function display in-
dicates error code 30, but this is
not a malfunction. Turn the key to
"OFF" and then to "ON" to clear
the error code. Failing to do so will
prevent the engine from starting
even though the engine will crank
when pushing the start switch.
an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start
switch to restart the engine.
EAU48711
Starting the engine
In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
The transmission is in the neutral
The transmission is in gear with
1. Turn the key to "ON" and make
NOTICE
If a warning light does not come on
initially when the key is turned to
"ON", or if a warning light remains
on, see page 4-2 for the correspond-
ing warning light circuit check.
6-1
position.
the clutch lever pulled and the
sidestand up.
See page 4-22 for more informa-
tion.
sure that the start/engine stop
switch is set to "
".
The
following
warning
should come on for a few sec-
onds, then go off.
Oil level warning light
Coolant temperature warning
light
Engine trouble warning light
EAU58331
lights
ECA15485
Advertisement
