Philips AUT2016 User Manual page 12

2. User interface
1
4
When the faucet is turned on, all the indicators will light up to show the lter lifetime,
the power status, and the error indicator will be off unless there is an error.
a. Filter lifetime indicator
Status
More than 14 days
Less than 14 days
The filter has reached the
end of life and should be
replaced immediately
b. Error indicator
- If the faucet is constantly turned on for 2 hours, the system will go into protection
mode and shut down. Meanwhile, the error indicator ashes in red, and you will
hear beeps. Unplug the system, wait for 1 minute, and plug in again to shoot the trouble.
- When a leakage is detected, the error indicator will constantly light up in red,
and you will hear beeps. The system will go into protection mode and shut down.
Please refer to the troubleshooting to resolve the issue.
c. Auto-flush
- The system flushes automatically when it is powered up.
- The system flushes automatically when it has been filtering water continuously
for 5 minutes.
- The system ushes automatically when it is hasn't been ltering water for 72 hours.
3
2
Indicator
Constant blue ligh
Flashing red light
Constant red light
CP filter lifetime indicator
1
RO filter lifetime indicator
2
Error indicator
3
Reset button
4
There will be beeps whenever
reminding you to replace the lter.
There will be beeps whenever
reminding you to replace the lter.
10
Sound alert
N/A
the faucet is turned on,
the faucet is turned on,