Axent .ONE C PLUS E314 User Manual page 27

REMOTE CONTROL
AUTO CLOSE SETTING
Factory setting: Auto Close function is ON.
Setting
Press « Setting » at the same time « Close » to activate Auto Close.
Press « Close » repeatedly to enable or disable Auto.
Close
The Level Indicator indicates the selected level:
- OFF
- ON
AUTO FLUSH SETTING
Factory setting: Auto Flush function is 15 seconds.
Setting
Press « Setting » at the same time « Flush » to activate Auto Flush Setting.
Press « Flush » repeatedly to toggle between OFF, 5 seconds, 10 seconds, 15 seconds, 20 seconds and 25 seconds.
Flush
The Level Indicator indicates the selected level:
- OFF
- 5 seconds
- 10 seconds
- 15 seconds
- 20 seconds
- 25 seconds
DEODORIZE SETTING
Factory setting: Deodorize function is ON.
Setting
Press « Setting » at the same time « Mute » to turn the function on or off.
The indicator indicates the selected option:
Mute
- ON
- OFF
USER PROFILE
Press « User » to switch between different user profiles. There are a total of 5 user profiles.
User
The Level Indicator indicates the selected user profile.
Functions will automatically revert to settings defined by the user.
Changes to the user' s settings will be saved automatically when the user profile is active.
You will exit the user profile mode after activating the stand-by mode of the remote control for a moment.
One indicator on.
Five indicators on.
All indicators off.
One indicator on.
Two indicators on.
Three indicators on.
Four indicators on.
Five indicators on.
The indicator light remains on.
The indicator blinks for one second and turns off.
25