Axent .ONE C PLUS E314 User Manual page 21

REMOTE CONTROL
PAIRING
Cut off the power to the intelligent toilet, wait for 30 seconds, and then reapply power.
After three times «beep»,
start pairing by pressing « Stop » repeatedly until hearing three times long «beep» from the intelligent toilet, which means pairing suc-
Stops
cessful.
Pairing has originally been done in the factory. It is only necessary after the remote control has been replaced.
OPENING AND CLOSING THE SEAT AND LID
Press « Lid » when the unit is not in use to open the lid.
- When Auto Open is enabled and set to Lid, the lid will automatically open when someone approaches.
Lid
Press « Seat » when the unit is not in use to open the seat and lid.
- When Auto open is enabled and set to Seat, the lid and seat will automatically open when someone approaches.
Seat
Press « Close » when the unit is not in use to close the lid and seat.
- Lid and seat will be closed automatically 2 minutes after leaving.
Close
The seat will only open automatically after being closed for more than 10 seconds.
Please do not put things on the lid or seat.
FLUSH
Press « Flush » to start.
- After being seated for more than 5 seconds, the function will be started after a period of time defined by the Auto flush setting
Flush
which defaults to 15 seconds.
19