Advertisement
6
Step 4. Orienting the TurboChip
When installing the TurboChip
3) must match Pin 1 on the processor socket (See Figures 2 and 3 on page 3).
The orientation of the processor socket will vary depending on the make and
model of your particular computer. Follow the steps below to determine the
correct orientation of TurboChip
1.
Look at the TurboChip
Refer to Figure 1 on page 3 for help in locating Pin 1 on the
TurboChip
2.
With the TurboChip
upgrade matches the beveled corner on the processor socket, you are
ready to insert TurboChip
Warning: The processor pins are keyed to fit into the socket one way only. If
the processor upgrade is not installed correctly (Pin 1 to Pin 1), it may result in
damage to the computer, the processor upgrade, or both. Please orient Pin 1 on
®
the TurboChip
below.
Kingston Technology Company
®
, the orientation of Pin 1 (See Figure 1 on page
®
®
.
®
upgrade to match Pin 1 on your CPU socket. Refer to Figure 5
Pin 1
Figure 5: Orienting the TurboChip
in your computer.
®
carefully to verify which corner is Pin 1.
positioned so that the beveled corner on the
®
into the empty CPU socket.
TurboChip
Hardware Installation
®
®
400 User's Guide - Rev. A00
Advertisement
