Problem Solving Guide; Fault Messages; Other Messages - Miele PT 8331 + COP Operating Instructions Manual

Problem solving guide

Fault messages

Indicator / display
N 0
N W

Other messages

After sales service
In the event of any faults please contact your Dealer or the nearest Service Department.
When contacting your dealer or Service Department, please quote the Model,
Serial number (Fabr.Nr) and Material number (M.Nr) of your machine.
These are shown on the data plate.
The data plate is located at the top of the door aperture with
the door open or at the top of the rear of the machine.
18
Possible cause
Over-pressure in vent ducting.
Leaks in the airways.
Fluff filter blocked
Gas burner malfunction
Peak load cut-out
The dryer will continue to run without
heating (cold) for the remainder of the
programme.
Remedy
Check the vent ducting.
Call the Service Department.
Clean the fluff filter.
Press the START/STOP button.
If the peak load cut-out is overridden, the
programme will continue as normal.