Canon EOS 5D Mark IV Instruction Manual page 5

View Assist
● Canon Log is a movie characteristic to attain wide dynamic range. As a result, the
image displayed on the LCD monitor has low contrast and is somewhat dark compared
to when a Picture Style is set.
● With [View Assist.] set to [On], the movie image will be displayed on the LCD monitor
with a clear-viewing characteristic. This makes it easier to check the image details,
etc.
● Note that even if [View Assist.] is set to [On], it will not affect the movie recorded to
the card. (The movie will be recorded to the card with Canon Log characteristics.)
● With [View Assist.] set to [Off], the movie image is displayed with the Canon Log
characteristic on the camera's LCD monitor or also in EOS Utility (EOS software).
● Even if [View Assist.] is set to [On], the HDMI output movie image will be output with
the Canon Log characteristic.
● If [View Assist.] is set to [On], a magnified display will also be displayed with the View
Assist.
8
Set the View Assist.
● Set it as necessary.
● Turn the <5> dial to select [View Assist.], then press
<0>.
● Turn the <5> dial to select [On], then press <0>.
► The image is displayed with View Assist when you
shoot a movie.
9
Shoot the movie.
● In the EOS 5D Mark IV Instruction Manual, refer to
pages 334–343 before shooting a movie.
5
Setting the Canon Log