Canon EOS 5D Mark IV Instruction Manual page 3

Hide thumbs Also See for EOS 5D Mark IV:

Shooting Function Settings

●

Shooting with ISO Auto is not possible. (When Canon log is set with ISO Auto setting,

ISO 400 will apply.)

●

If the ISO speed is manually set to ISO 100 – ISO 320, the dynamic range will become

narrower.

●

When Canon Log is set, dynamic range will be approx. 800% at ISO 400 or higher.

●

AF shooting is possible even when Canon Log is set. However, when shooting with

Canon Log, achieving focus with AF on a subject under low-light or with low contrast

may become more difficult than in normal shooting.

●

When shooting 4K movies with Canon Log setting, [Peripheral illumin.] under [z1:

Lens aberration correction] cannot be set (does not function).

●

Canon Log can also be set for high frame rate movie shooting.

●

Canon Log settings can be registered under Custom Shooting Modes (C1/C2/C3).

Set the shooting function.

●

Set the ISO speed manually.

●

Set the shutter speed and aperture.

Setting the Canon Log