Canon EOS 5D Mark IV Instruction Manual page 2

Setting the Canon Log
Canon Log is a gamma characteristic for post-production. It maximises the image sensor's
characteristics and attains a wide dynamic range for movie shooting. It reduces loss of
shadow and highlights details, and the tonal information from the shadows to highlights
can be incorporated in the movie.
During post-production, a lookup table (LUT) can be applied to movies shot with Canon
Log. Download the LUT data from the Canon website www.canon.com/icpd.
1
Set the Mode Dial to <a>.
● If the shooting mode is <A> <d> <s> <f>
<F>, Canon Log setting discribed in step 3 cannot be
performed.
2
Set the Live View shooting/Movie shooting
switch to <k>.
► The Live View image will appear on the LCD monitor.
3
Select [Canon Log settings].
● Press the <M> button.
● Under the [z5] tab, select [Canon Log settings],
then press <0>.
4
Select [Canon Log].
● Press <0>.
5
Select [On].
● Turn the <5> dial to select [On], then press <0>.
► Canon Log will be set.
2