Test Mode Menu
(3)
This machine is equipped with the test mode to check operations of various functions listed below.
Please refer to Service Data Registration/Setting for instructions to select the test mode. Press the
[Stop/Reset] button and then the [ON/OFF] button to end the test mode.
DIAGNOSTIC MENU
Firmware: xx.xx
1.CSLED Adjustme
2.Print COMET*
4.FB Scan Test*
9.Panel Test
10.Scanner Self*
Diagnosis Test
11.DRAM Test*
12.CR Run-in*
13.PF Run-in*
14.PF Life*
15.Check Sensors*
16.ALL RUNIN*
* ' indicates that these
are not used in the field.
1-26