Advertisement
Remove screw 1 and form
washer 2.
Remove end muffler 3 with
scuff-protection washer 4 and
clamp 5.
Installing end muffler
Lightly lubricate inside of
clamp 1 and push onto end
muffler.
Lightly lubricate inner diameter
of end muffler 2 and push on
up to stop.
Lubricant
Copper paste
Install screw 3 with form
washer 4 and scuff-protection
washer 5.
Muffler on rear frame
14 lb/ft (19 Nm)
Position clamp 1 with recess in
lug Arrow.
Tighten nut 2.
Clamp on muffler and
exhaust manifold
16 lb/ft (22 Nm)
5
21
z
Advertisement
