Ricoh Aficio 615c Network Manual page 99

Messages
Near Replacing: Develop. Unit C
Near Replacing: Develop. Unit K
Near Replacing: Develop. Unit M
Near Replacing: Develop. Unit Y
Near Replacing: Fusing Unit
Near Replacing: Maintenance Kit
Near Replacing: Transfer Unit
Nearly Full: Collector Bottle
Nearly Full: Waste Toner
Nearly Full:Front CollectBottle
Nearly Full:Sucked Toner Bottle
Need more Booklet Staples
No Paper: 1-Sheet Bypass
No Paper: Interposer Tray
No Paper: Selected Tray
No Paper: Tray 1
No Paper: Tray 1 (LCT)
No Paper: Tray 2
No Paper: Tray 3
No Paper: Tray 3 (LCT)
No Paper: Tray 4
No Paper: Tray 5
No Paper: Tray 6
No Paper: Tray 7
Not Detected: B2 Lever
Not Detected: Black Toner
Not Detected: Charger
Not Detected: Cleaning Unit
Not Detected: Cyan Toner
Not Detected: Develop. Unit (C)
Not Detected: Develop. Unit (K)
Not Detected: Develop. Unit (M)
Not Detected: Develop. Unit (Y)
Not Detected: Duplex Feed Unit
Not Detected: Duplex Unit
Getting Printer Information over the Network
Description
Prepare the new development unit (cyan).
Prepare the new development unit (black).
Prepare the new development unit (magenta).
Prepare the new development unit (yellow).
Prepare the new fusing unit.
Prepare the new maintenance kit.
Prepare the new transfer unit.
Waste toner bottle is nearly full.
Waste toner bottle is nearly full.
Front collector bottle is nearly full.
Waste toner bottle is nearly full.
Stapler has almost run out of staples.
There is no paper in 1-sheet bypass tray.
There is no paper in interposer unit.
There is no paper in specified tray.
There is no paper in tray 1.
There is no paper in the large capacity tray (tray 1).
There is no paper in tray 2.
There is no paper in tray 3.
There is no paper in tray 3 (Large Capacity tray).
There is no paper in tray 4.
There is no paper in tray 5.
There is no paper in tray 6.
There is no paper in tray 7.
B2 lever is not correctly set.
Black toner is not correctly set.
Charger is not correctly set.
The cleaning unit is not correctly set.
Cyan toner is not correctly set.
The development unit (cyan) is not correctly set.
The development unit (black) is not correctly set.
The development unit (magenta) is not correctly set.
The development unit (yellow) is not correctly set.
The duplex unit is not correctly set.
The duplex feed unit is not correctly set.
2
91