Using Destination Lists - Ricoh Aficio 3228C Facsimile Reference Manual

Faxing
B B B B
Press [Names] and enter any neces-
sary information.
2
C C C C
Press [OK].

Using Destination Lists

When you program a destination
number into a destination list, you
can specify the destination by just se-
lecting the Quick Dial key from the
destination list.
The programmed name appears on
Quick Dial key.
Pressing
list between fax number, e-mail ad-
dress, and IP-Fax number.
If you program multiple destinations
into a Group, you can send messages
to all destinations in that Group using
just a few keystrokes. Destinations
programmed in a group are indicated
by .
Preparation
In the destination list, program an
individual fax number, IP-Fax
number, e-mail address and/or
groups of destinations. See "Fax
Destination", "E-mail Destina-
tion", and "Registering Names to a
Group", General Settings Guide.
40
switch the destination
Limitation
❒ Group Dial can be used only for
Memory Transmission; it cannot
be used for Immediate Transmis-
sion. The machine automatically
changes to Memory Transmission
when you use Group Dial.
❒ A total of 500 destinations (per mes-
sage) can be programmed for
Group Dial.
Note
❒ To check the contents of Quick Di-
al, print the destination list. See
"Administrator Tools", General
Settings Guide.
❒ A stored name can be printed out
on the first page of a received fax at
the other end. See p.73 "Label In-
sertion", Facsimile Reference <Ad-
vanced Features> .
❒ To check the contents of the Groups,
print the list. See "Administrator
Tools", General Settings Guide.
A A A A
Press to switch the destina-
tion between fax number, e-mail
address, and IP-Fax number.
B B B B
Press the title key where the de-
sired destination is programmed.
For example, if you want to specify
" N E W Y O R K O F F I C E " p r o -
grammed in "LMN", press [LMN].