Job Preset - Ricoh Aficio 2051 Copy Reference Manual

A A A A
Press { { { { Face Up} } } } key.
B B B B
Place originals, and then press the
{ { { { Start} } } } key.

Job Preset

You can make settings for the next
copy job while copying is in progress.
If a long copy job is in progress and
you do not want to wait for it to fin-
ish, you can use this function to make
settings for the next copy job in ad-
vance. When the current copy job fin-
ishes, the next job begins automatically.
Reference
See "Job List", General Settings
Guide
A A A A
Press [Next Job] when "
displayed.
B B B B
Make settings for the next copy
job.
C C C C
Place the originals in the ADF,
and then press the { { { { Start} } } } key.
All originals are scanned.
After the current copy job, the next
job starts automatically.
❒ Each job stored is allocated a job
❒ To switch the display to the cur-
Editing Job Preset
You can check and change the con-
tents of preset jobs. You also can de-
lete preset jobs.
A A A A
Press [Reserved Job].
" is
Copying
B B B B
Select the number of the job you
want to check or change.
C C C C
Press [Check/Change Job].
The contents of the job are dis-
played.
To check the job contents
A A A A
Check the contents of the job.
B B B B
The display returns to the Re-
served Job screen.
Note
number that is displayed on the
Reserved Job screen.
rent copy job press [Reserved
Job], followed by [Printing], and
then [Exit]
Press [Confirmed].
Basic Procedure
2
21