Lightbulb Replacement Instructions - M.T.H. RailKing R-12 Subway Set Operator's Manual

Lightbulb Replacement Instructions

Interior Lights
To replace the interior lights in the
powered unit:
1. Follow the shell removal instructions
found in the "Lubrication and Greasing"
section of this booklet.
2. Pull bulb straight out to remove.
( See figure 5)
To replace the interior lights in the
unpowered units:
1. Remove the eight Phillips screws from
the chassis, then lift the body away from
the chassis. Lift the shell off carefully and
turn body shell over to reveal interior
lights. (See figure 6)
2. Pull light bulbs straight out and push
new bulbs straight in to replace.
( See figure 7)
Away From Socket To Remove
Figure 7
14
Gently Pull Bulbs
RailKing R-12 Subway Set
Gently Pull Bulbs
Away From Socket To Remove
Figure 5
Non-Powered Car Chassis & Body
Figure 6