Advertisement
Before use: Tighten the tailcap.
Modes: Firefly1, Firefly2, Main modes, Turbo1, Turbo2 or Turbo3 (last used in Advanced, Turbo2 by default).
In OFF state:
1 click: To turn on the last used mode.
Press and hold: To start cycling through Firefly modes. Release to select. Keeping button pressed will start cycling through Main modes.
In ON state:
1 click: To turn off the flashlight.
Press and hold: To start cycling through Main modes from any mode. In Firefly1 cycling through Main modes starts after cycling through Firefly modes.
Release to select.
2 clicks: To turn on Turbo mode from any mode. The second double click brings back last used mode.
To switch between types of operation unscrew the tailcap to 1/4 while the flashlight is off, press the button and tighten the tailcap while keeping the button pressed.
Sections of modes:
In OFF state:
1 click: To turn on the last used mode. Press and hold: To turn on Firefly1 mode [Section 1]. Keeping button pressed will start cycling through modes: Firefly1 - Firefly2 - Firefly3 - Main1 - Main2 - Main3 - Turbo1.
In ON state:
1 click: To turn off the flashlight. Press and hold: To start cycling through the modes of relevant Section.
The same in OFF & ON states:
2 clicks: To turn on Main mode [Section 2]. Another double click will switch between chosen modes in [Section 1] and [Section 2].
3 clicks: To turn on Turbo mode [Section 3].
4 clicks: To turn on Strobe mode [Section 4].
Armytek Optoelectronics Inc.
Germany, 10551 Berlin, Jonasstraße 6
+1 (206) 785-9574 • service@armytek.com • www.armytek.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the WIZARD C2 PRO and is the answer not in the manual?
Questions and answers