Table of Contents
Advertisement
Equalization Controls
50Hz
Nom.
Min
0
180
Figure 18: Equalization controls
Optimizes the subwoofer's response for your specific
listening room. The parametric equalizer includes
variable controls to adjust Frequency, Bandwidth and
Level, as shown in Figure 18.
Note
Specific measurement equipment is required
to properly adjust the Equalization controls.
Your authorized Revel dealer can make the
appropriate measurements, using suitable
equipment to ensure optimal results.
Power Switch
Connects or disconnects power from the AC input cord.
During periods of intermittent use, the Power Switch can
be left on. Turn off the Power Switch for extended
periods of nonuse.
AC Input Cord
Provides power to the B120 through the power cord.
12
150 z
H
Max
Phase
WIRELESS
CONNECTION
Figure 19: Wireless transmitter
The Concerta B120 subwoofer can be connected
wirelessly by using the optional TX1 transmitter, shown
in Figure 19. The TX1 transmitter utilizes advanced
wireless transceivers which operate in the 2.4GHz
frequency band – the same frequency band used for
wireless home networks and high-quality cordless
phones. This high-frequency band allows the wireless
transmission of high-quality sound to remote locations.
One TX1 transmitter can support up to two B120 subwoofers.
A third or fourth subwoofer may be connected by using
an additional TX1 transmitter.
The TX1 Package Includes:
1 x Transmitter module
1 x Power supply for transmitter
1 x 120V AC power cord for transmitter power supply
1 x 230V AC power cord for transmitter power supply –
Shuko plug
1 x 230V AC power cord for transmitter power supply –
UK plug
1 x 6' (1.8m) audio stereo cable, RCA-RCA
1 x Wall-mount bracket for transmitter
2 x Panhead M3 x 4 machine screws for attaching
wall-mount bracket to transmitter
4 x Small, round, self-adhesive feet – to be attached on
transmitter's left-side panel if transmitter is to be used
vertically
Revel Concerta B120
Owner's Manual
Advertisement
Table of Contents
