Table of Contents
Advertisement
Figure 14: Rear-panel controls and connectors
SUBWOOFER
OPERATION
The rear panel of the Concerta B120 subwoofer, shown
in Figure 14, contains all of the available connectors
and controls. The Input section of the rear panel was
discussed in the "Making Connections" section, earlier
in this manual. The subwoofer controls are discussed
in this section. For more information on the wireless
connection option, refer to the "Wireless Connection"
section found later in this manual.
10
50Hz
150 z
H
Nom.
Min
Max
0
180
Phase
AC 120V ~60Hz
Power Indicator LED
The Power Indicator LED identifies the current state of
the B120 subwoofer. The subwoofer has three different
powered states – each identified by a different color. The
Power Indicator LED reflects the color of the current power
state. The color and the state each color indicates are:
Red: Standby – the B120 automatically enters Standby
if no signal is detected from the system for 10 minutes.
Green: On – as soon as a signal is detected, the B120
powers on.
Orange: On – the B120 is powered on, and both the
wireless link and transmitter are active.
Revel Concerta B120
Owner's Manual
Antenna
Power
On
Off
2A
Advertisement
Table of Contents
