Advertisement
Using the two 10-32 X ½" screws,
attach the bottom mount bracket to
the top mount bracket.
Gauge fully mounted.
6.
Remove the back plate from the MCL-7000 Series gauge.
7.
Work the grommet from the harness into the slot in the back plate.
8.
Connect the harness from this kit to the MCL-7000 Series gauge.
9.
Put back cover back onto MCL-7000 Series gauge so that the gauge will face up when mounted.
10.
Mount gauge to mounting hardware.
11.
Plug 4 pin and 6 pin connector into connectors in original place.
12.
Disconnect the two pin plug from the ignition switch located under the tank by the ignition switch.
13.
Plug the 2 pin connector from the ignition switch into the gauge harness
14.
Plug the other 2 pin connector from the gauge harness into the 2 pin connector from the bike.
15.
Secure the wire with provided plastic ties.
Troubleshooting:
Occasionally, the stock American Iron Horse ignition switch can "chatter" due to vibrations at high engine RPM.
This can cause the gauge to operate incorrectly. It is recommended to solve this problem by replacing the stock ignition
switch with a Harley Davidson switch (kit number 71441-94). This switch is less prone to chatter.
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions or
problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems.
Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization
number. Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure to include the RMA
number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number
where you can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase. Send no money. We will
bill you after repair.
DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or
workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital's option.
This warranty does not cover nor extend to damage to the vehicle's systems, and does not cover removal or reinstallation of the product. This Warranty does not
apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or
accident.
This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited to
the duration of this written warranty. Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24
months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with
the sale of this product.
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
SERVICE AND REPAIR
Dakota Digital 24 Month Warranty
2
page
Gauge fully mounted.
MAN#650254
Advertisement
