Heating Pump Motor Assembly - Electrolux ESF6010BW Service Manual

Removal and Replacement
1. Remove cover of bottom board. (see main control board removal and replacement)
2. Pull out all terminals of microswitch.
3. Unfit snaps fixing microswitch to floater holder.
4. Unfit snaps fixing floater holder to cover of bottom board.
5. Reverse the above procedure to install. And check out all connectors connected well.

Heating pump motor assembly

Part Name: 1 – heating pump assembly 2 – lower pump cover
3 – motor assembly 4 – motor hunger
Removal and Replacement
1. Remove cover of bottom board. (see main control board removal and replacement)
2. Pull out all terminals of heating pump motor assembly.
Terminals
Snaps
Terminals
Clamps
1
2
3
4
8