Table of Contents
Advertisement
Impellers are not properly shimmed or
are rubbing.
Poor washability.
Clogged filter assembly.
Dishware stop the sprayer
Improper loading of dishes, pots, pans,
and nesting of silverware.
Little detergent/rinse module
Select improper program
Defective detergent/rinse module
Defective spray arm.
Too little water fill.
Defective motor pump
Poor drying of
Improper loading of dishes, pots, pans,
dishes
and nesting of silverware.
Select improper program
Defective dispenser
Too much water fill.
Water leaks from
Defective drain pump
dishwasher.
Dishwasher not level.
Soap suds leak from dishwasher.
Loose hose clamps.
Loose overflow cover.
Drain
properly with sump.
Defective flow system seals.
pump
assembly
not
Use the shim guage furnished in the impeller seal
kit. When the seal is properly shimmed the
impellers will be in the correct operating position.
Clean the filter assembly.
revolve the sprayer before wash.
Refer to the owners manual.
Replace the etergent/rinse module.
Check spray arm for proper rotation.
See "Too little water fill" symptom.
Replace the motor pump
Instruct the customer on proper loading of the
dishwasher. Refer to the owners manual.
Replace the dispenser
See previous symptom.
Replace the drain pump
Level the dishwasher.
Refer to use and care manual.
Tighten or replace hose clamps.
Remount the overflow cover.
seated
Remount the drain pump assembly.
Replace the flow system seals.
23
Advertisement
Table of Contents
