Cisco CGR 1000 Series Getting Connected Manual page 34

Figure 4 N-Connector Installed in Unused Antenna Port
1
3
Connecting the Antenna to the CGR 1120
Secure the coaxial end of the end-to-end RF antenna cable to the antenna ports of your CGR 1120 router. as shown in
Figure 5.
Lightning arrestor
Plug: torque to 6 to 7 ft-lbs
2
3
2 N-connector: torque to 6 to 7 ft-lbs
4 Ports must have either an antenna, connector, or plug
installed.
34
1
4