Page 1
Oil-Filled Radiator INSTRUCTION MANUAL Model UHR-840 DO NOT TURN HEATER UPSIDE-DOWN DURING OPERATION.
Page 2
INTRODUCTION Thank you for purchasing our Oil-Filled Radiator. Each unit has been manufactured to ensure safety and reliability. Before first use, please read the instructions carefully and keep them for further reference. ASSEMBLY Remove the heater and all the accessories from the carton. 1.
Page 3
1. Room temperature can be adjusted using the thermostat simply. Turn the thermostat knob clockwise, to increase the heat, and anti-clockwise to decrease the temperature, until you reach the desired temperature. 2. Switch the heater to one of the following power settings. Model: NY-25(13)1KTF a) Push switch one ( I )1000W b) Push switch two ( II ) 1500W...
Page 4
number 18 is in line with the arrow pointer. 3. Set the time the heater is required to run by pulling the segments around the outer ring outward appropriate to the running period(s) required. 4. When set, the heater will operate each day during the time programmed.
Page 5
4. Place the heater, and wheel assemblies in the original box, and store in a cool and dry place. 5. If you choose to store your heater fully assembled be sure to cover it to protect it from dust. IMPORTANT SAFEGUARDS 1.
Page 6
scrapping the appliance have to be followed. 21.The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety 22.Children should be supervised to ensure that they do not play with the appliance.
Need help?
Do you have a question about the UHR-840 and is the answer not in the manual?
Questions and answers